How to Install a Fire Front Panel on Your Custom PC

By MAINGEAR | High-performance custom PCs | Published: 2026-10-29

Category: How-to Guides

Learn how to install the MAINGEAR Fire Front Panel on your MG-1. This guide covers preparation, removal, and attachment steps with common mistakes to avoid.

Quick answer

To install the MAINGEAR Fire Front Panel, you need to remove the existing front panel from your MG-1 and attach the new one using the provided clips. The process takes about 10 minutes and does not require any tools.

Before you start

The Fire Front Panel is designed specifically for the MG-1 case, available in two versions: All-new MG-1 and Classic MG-1. Make sure you select the correct version when ordering to ensure a proper fit.

Work on a clean, flat surface to avoid scratching the panel's neon red finish. The panel is a cosmetic accessory only and does not affect internal hardware or cooling.

Installation steps

Step 1: Remove the existing front panel: Gently pull the current front panel away from the MG-1 case, starting from the bottom edge. The panel is held by clips; apply even pressure to release them without bending the plastic. Common mistake: pulling too hard or from the top can break clips. Always start at the bottom.
Step 2: Align the Fire Front Panel: Hold the Fire Front Panel so the clips on the back align with the slots on the MG-1 case. Ensure the panel is oriented correctly (the neon red side faces outward). Checkpoint: Verify the panel version (All-new or Classic MG-1) matches your case before pressing it into place.
Step 3: Attach the new panel: Press the Fire Front Panel firmly into the case starting from the top, then work your way down until all clips click into place. You should hear a distinct snap for each clip. Common mistake: pressing only in the center may leave edges loose. Ensure all clips engage fully.

Product details

Fire: The MAINGEAR Fire Front Panel is a case accessory that brings a bright neon red glow to your gaming PC. It is designed as a front panel option for the MG-1, adding fiery red energy to the look of your build. This panel instantly transforms the look of your MG-1 with a vibrant red glow, making your setup stand out without any internal modifications.
Fire