Voltar ao blog
Guias Práticos 2026-11-20 MAINGEAR | High-performance custom PCs 1 visualizações

How to Install CoolerMaster MasterLiquid PL360 Flux White

How to Install CoolerMaster MasterLiquid PL360 Flux White

Step-by-step guide to installing the CoolerMaster MasterLiquid PL360 Flux White AIO cooler. Covers socket compatibility, radiator fitment, and what to check before you buy a re-certified unit.

Before You Begin: What the PL360 Flux White Covers

The CoolerMaster MasterLiquid PL360 Flux White is an AIO liquid cooler with vivid RGB lighting and broad CPU socket support. It fits both current and recent Intel and AMD platforms, including LGA 1851/1700/1200/2066/2011-v3/2011/1151/1150/1155/1156 on the Intel side, and AMD AM5/AM4/AM3+/AM3/AM2+/AM2/FM2+/FM2/FM1/TR4. That covers nearly every mainstream desktop CPU released in the last decade.

Before starting, confirm that your case has room for a 394 mm × 119.6 mm × 27.2 mm radiator. The PL360 Flux White uses a standard radiator format, so it fits most mid-tower and full-tower cases with front, top, or side mounts. Measure your available space if your case is compact or unusual.

Installation Steps

The following steps are based on standard AIO installation practice. The supplied catalog does not include a full instruction manual, so refer to the included CoolerMaster documentation for torque specs and thermal paste application details.

  1. 1. Prepare the CPU and socket: Clean the CPU surface with isopropyl alcohol. Apply a small pea-sized amount of thermal paste (if not pre-applied). Install the correct backplate and mounting bracket for your socket type using the CoolerMaster hardware.
  2. 2. Mount the radiator and fans: Position the radiator in your case. Attach the three fans to the radiator using the long screws provided. Orient the fans to push air through the radiator (intake or exhaust depending on your case airflow plan).
  3. 3. Install the pump block: Place the pump block onto the CPU, ensuring even contact. Secure it with the thumb screws or spring-loaded screws from the mounting kit. Tighten in a cross pattern to avoid uneven pressure.
  4. 4. Connect power and RGB cables: Connect the pump's 3-pin or 4-pin power cable to a CPU_FAN or AIO_PUMP header. Connect the fan cables to a CPU_FAN header or a splitter. The RGB cable connects to a 3-pin ARGB header on your motherboard for lighting control.

Key Specifications for Fitment

  • CoolerMaster MasterLiquid PL360 Flux White: Radiator Dimensions: 394mm x 119.6mm x 27.2mm This tells you the exact space required inside your case. A radiator slot is needed; measure if your case is non-standard.
    CoolerMaster MasterLiquid PL360 Flux White
    CoolerMaster MasterLiquid PL360 Flux White
  • CoolerMaster MasterLiquid PL360 Flux White: Compatibility: AMD AM5/AM4/AM3+/AM3/AM2+/AM2/FM2+/FM2/FM1/TR4 Covers almost all modern AMD sockets, including Threadripper (TR4). You likely have a compatible CPU.
  • CoolerMaster MasterLiquid PL360 Flux White: Intel LGA 1851/1700/1200/2066/2011-v3/2011/1151/1150/1155/1156 Supports Intel's latest LGA 1851 and 1700 sockets, as well as older LGA 115x and HEDT platforms.

Re-Certified Unit Considerations

The PL360 Flux White is available as a Re-Certified Outlet Store Component. Each unit is inspected and validated by MAINGEAR technicians to ensure proper functionality and performance. However, outlet sales are final and not eligible for return. These items do not include a MAINGEAR warranty or technical support, though some components may still carry active manufacturer warranties.

If you buy a re-certified unit, check the manufacturer's warranty status before installation. The installation process itself is identical to a new unit.

Artigos relacionados

Customer Service
Início
Produtos
Carrinho
Perfil